1、How to use lights when pulling over on road?
A、turn on the hazard lights
B、turn on the right-turn signal in advance
C、use the high and low beam lights alternately
D、not need to use any light to indicate
Answer：B
2、In the course of reversing, the driver should move slowly, observe the conditions on both sides and in the rear and be ready to stop anytime.
A、Right
B、Wrong
Answer：A
3、The hazard lights can be used when ________
A、encountering traffic congestion
B、following a vehicle on road
C、the vehicle breaks down and stops
D、leading the vehicle behind
Answer：C
4、Driving a motorized vehicle in the city road which has no central line, the maximum speed can not exceed 50 kilometers per hour.
A、Right
B、Wrong
Answer：B
5、Whats the meaning of the double white broken lines in far front of the intersection?
A、waiting to run line
B、stopping and yield line
C、slowdown and yield line
D、left-turn waiting line
Answer：C
6、When a vehicle stops temporarily in a snowy day, the driver should turn on _______.
A、The head and tail fog light
B、The reserve light
C、The high beam light
D、The hazard lights
Answer：D
7、What is this manipulation device?
A、the air throttle lever
B、the gear lever
C、the clutch lever
D、the handbrake
Answer：D
8、When driving at night, the driver should try as much as possible to avoid overtaking. When he really needs to overtake, he may switch the high and low beam lights to alert the vehicle in front.
A、Right
B、Wrong
Answer：A
9、At night, the drivers observation is markedly poorer than in the daytime and the range of visibility range is _______.
A、Unchanged
B、Irregular
C、Longer
D、Shorter
Answer：D
10、What marking is the white broken line on the road?
A、central line of opposite lanes which is prohibited from crossing
B、central line of opposite lanes which is restricted from crossing
C、central dividing line of the one-way road lanes
D、central line of same direction lanes which is allowed to cross
Answer：D
11、Whats the meaning of this sign?
A、no left turn
B、leftt and right turn
C、no leftt and right turn
D、no right turn
Answer：B
12、When driving slowly in a congested road, the driver should ________ if another vehicle forcefully cuts in.
A、Honk to warn it against cutting in
B、Speed up to closely follow the vehicle in front and refuse to allow it to cut in
C、Squeeze the cutting-in vehicle to force it to leave
D、Voluntarily yield to ensure safe driving
Answer：D
13、What marking is the combination of the white broken lines and the triangle area?
A、road entry marking
B、lane-dividing line that can be crossed
C、deceleration line at road entry
D、road exit marking
Answer：A
14、Whats the meaning of this sign?
A、reduce speed and go slowly
B、watch for danger
C、jammed section
D、accident-prone section
Answer：B
15、When a vehicle passes a school or a residential area, the driver should observe the signs and markings, go slowly and refrain from honking.
A、Right
B、Wrong
Answer：A
16、Whats the meaning of this sign?
A、no honking the tweeter
B、no honking the woofer
C、should honk
D、no honking
Answer：C
17、What marking is the white semicircle in the circle?
A、driving at reduced speed
B、ascertaining the vehicles speed
C、reducing the speed at the intersection
D、ascertaining the distance between the vehicles
Answer：D
18、Whats the meaning of this sign?
A、watch for long time honking
B、an unmanned level crossing
C、a manned level crossing
D、multi-crossing of railway and road
Answer：B
19、On which kind of city road a vehicle is not allowed to overtake?
A、main streets
B、one-way section
C、section with heavy traffic flow
D、two one-way lanes
Answer：C
20、Before the motorized vehicle runs on the road, the driver should check the safety and technical performance of the vehicle.
A、Right
B、Wrong
Answer：A