1、A driver who drives an illegally assembled motorized vehicle is subject to ______ .
A、being held for criminal liabilities according to law
B、a fine of 200 yuan ~ 2,000 yuan
C、being revoked the vehicle license
D、being detained for less than 15 days
Answer：B
2、When a vehicle changes lane before an intersection, the driver should do so ______.
A、In the area marked by solid lines before the intersection
B、In the area marked by solid lines in the intersection
C、In the area marked by broken lines as indicated by the guide arrow
D、Before the stop line at the intersection
Answer：C
3、What is the max speed on the expressway when the visibility is lower than 200m?
A、less than 100km/hr
B、less than 90km/hr
C、less than 60km/hr
D、less than 80km/hr
Answer：C
4、The double yellow solid lines in the middle of the road are used to separate the traffic flow in opposite directions, crossing the lines to overtake or make a turn is allowed if it is safe.
A、Right
B、Wrong
Answer：B
5、Whats the meaning of this sign?
A、reduce speed in tunnel
B、turn on the high beam lights in tunnel
C、turn on the light in tunnel
D、width light in tunnel
Answer：C
6、What should the driver do if conditions permit when a following vehicle gives the overtaking signal on a road without a central line?
A、maintain the original speed
B、speed up
C、reduce speed, move to the right side and yield
D、immediately stop and yield
Answer：C
7、Which kind of vehicle can be initially applied for when one reaches 20 years old?
A、large truck
B、large bus
C、midsize bus
D、trailer
Answer：A
8、You should speed up through the section with this kind of traffic marking.
A、Right
B、Wrong
Answer：B
9、When changing lanes on an expressway, the driver should turn on the turn signal in advance, observe the traffic conditions, and slowly turn the steering wheel and enter the new lane after making sure it is safe to do so.
A、Right
B、Wrong
Answer：A
10、When driving at night, the driver should reduce speed and go forward if the vehicle coming in the opposite direction fails to turn off the high beam light. This is designed to prevent an accident from happening when there are pedestrians crossing the place where the lights of the two vehicles meet.
A、Right
B、Wrong
Answer：A
11、No U turn at this section.
A、Right
B、Wrong
Answer：B
12、When encountering non-motorized vehicles cutting in on the road, the driver should ___.
A、Honk to warn
B、Speed up and pass
C、Reduce speed and yield
D、Suddenly speed up when approaching
Answer：C
13、When discovering traffic congestion ahead while driving, the driver should ________.
A、Find a chance to overtake the vehicle in front
B、Weave through other vehicles
C、Reduce speed, stop and wait in line
D、Honk to urge other vehicles
Answer：C
14、Whats the meaning of the double white broken lines in far front of the intersection?
A、waiting to run line
B、stopping and yield line
C、slowdown and yield line
D、left-turn waiting line
Answer：C
15、Whats the meaning of this sign?
A、expressway mileage No.
B、expressway border plate No.
C、expressway name No.
D、expressway section No.
Answer：C
16、A driver should observe the dynamic situation of the rear side vehicles before driving into the traffic flow from other road.
A、Right
B、Wrong
Answer：A
17、Continue to go through if having passed the stop line when encountering this traffic light at the intersection.
A、Right
B、Wrong
Answer：A
18、After entering the acceleration lane of an expressway, the driver should increase the speed to more than _________ per hour.
A、50
B、60
C、30
D、40
Answer：B
19、Whats the meaning of this sign?
A、national boundaries
B、border defense
C、boundaries
D、customs
Answer：D
20、What is the max speed limit on this road?
A、100 km/hr
B、90 km/hr
C、120 km/hr
D、110 km/hr
Answer：B